Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Digital PTZ Camera Extension Kits
Model: RemoteCamUSB2E
- Extends camera power (no factory camera
- PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
- Simple Plug & Play installation, no programming required.
- Ethernet streaming video supported on 10/100/1000 capable devices
- All hardware-specific camera and codec connection cables included.
Product Info
Tech Specs
Documents
Videos
Sound Control Technologies (SCT) USB camera extension kits are designed to streamline the integration of USB PTZ cameras requiring USB, and Ethernet control. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.
- Extends camera power (no factory camera
- PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
- Simple Plug & Play installation, no programming required.
- Ethernet streaming video supported on 10/100/1000 capable devices
- All hardware-specific camera and codec connection cables included.
- PowerSniffer included for testing SCTLink™ cable conductor continuity.
- Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
- Field-upgradable firmware via microSD Card.
- Video Format: USB Video typically up to 1080p30/720p60
- UVC and IP Camera Control
- Two port 10/100/1000 Ethernet switch (RCU2E-HE™): Dual RJ45 connector
- 100/1000* Ethernet (RCU2E-CE™): RJ45 connector, Passive PoE up to 24W
- Power Out Connector (RCU2E-CE™): 5.5x2.5mm DC jack, 12VDC up to 1.2A
- USB Connector (RCU2E-CE™): USB-A for Data and 5V Camera Power up to 1.2A
- USB Connector (RCU2E-HE™): USB-B 2.0 for Host Connection
- Audio In/Out: 3.5mm TRS Jacks, Stereo Line Level Unbalanced
- SCTLINK™ CABLE SPECS:
- SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems.
- 1000 Mbps only supported for Link cables up to 15m
- Wiring Termination Standard T568A or T568B 100m Maximum Length (No Minimum Length)
- Power Consumption
- A linked kit will consume 4.8W, plus the power consumption of the attached camera.
- Warranty - Yes
- Spec Sheet available - Yes
- Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
- RCU2E-CE™ Camera End Module: Dimension: H: 0.789 x W: 2.264 x D: 3.725 inch; Weight: 0.2 lbs / 90g
- RCU2E-HE™ Head End Module: Dimension: H: 1.448 x W: 3.814 x D: 3.578 inch; Weight: 0.4 lbs / 181g
- WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
- Warranty (Length/Type): 3 Years
Extension kit
574896 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact JP Lilley & Son, Inc
close
JP Lilley & Son, Inc
2009 North Third Street
Harrisburg, PA 17102
USA
(717) 238-8123
www.jplilley.com
Contact in regards to this product:
Sound Control Technologies
Model: RemoteCamUSB2E
Request more information from a dealer near you
close
Request more information from a dealer near you
