Audience Response Systems : Response Clickers / Remotes : Turning Technologies - Accessibility

Accessibility Clicker

Model: Accessibility

12 keys
With Braille characters adjacent to the corresponding buttons
Answer key - answer transmitted automatically
Use ResponseCard Programmer to easily change and verify ID
Response confirmation through two-way communication via LED light and vibration

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Designed for the visually impaired, our accessibility clicker contains all the features and functionality of the audience response device, but with Braille characters adjacent to the corresponding buttons. In addition, the accessibility clicker includes a vibration motor that pulses when various actions occur. The device is compatible with TurningPoint interactive polling software.

12 keys
With Braille characters adjacent to the corresponding buttons
Answer key - answer transmitted automatically
Use ResponseCard Programmer to easily change and verify ID
Response confirmation through two-way communication via LED light and vibration
Available channels: up to 82 sessions can be running at one time in close proximity without interference
Includes a vibration motor that pulses when various actions occur
Compatible with TurningPoint assessment software

Warranty - Yes

Certifications: CE, FCC
Technology: RF
Depth: 0.30 in
Height: 3.30 in
Width: 2.10 in
Product Weight: 0.06 lbs
Warranty (Length/Type): 1 Year Limited
Input Capabilities:
- 12 key (1/A - 10/J, Ch/Channel).
- Answer Key - answer transmitted automatically.
- Programmable - manually enter ID number other than factory default.
- Use ResponseCard Programmer to easily change and verify ID.
Display:
- LED Light:
  - Green Light - Response Confirmation (Three seconds)
  - Response confirmation through two-way communication via LED light and vibration
Vibration Codes:
- Power Up: Long Pulse (2 seconds)
- Polling Open - Successful Response: Long Pulse (1 second)
- Polling Open - Valid Response: Long Pulse (2 seconds)
- Polling Open - Invalid Response: 3 Short Pulses (0.5 second each)
- Polling Closed/Invalid Answer Type: Short Pulse (0.25 second)
- Change Channel - Success: Short Pulse when GO is pressed (0.5 second) Long Pulse after successful change (1 second)
- Change Channel - Invalid: 3 Short Pulses (0.5 second each)
- Change Channel - 5 second timeout: 3 Short Pulses (0.5 second each)
- Receiver Not Present: 10 second timeout followed by 3 Short Pulses (0.5 second each)
- Firmware version: Major version - X Long Pulse(s) (2 seconds)
- Minor version - Y Short Pulse(s) (0.5 second)
- For example, version 1.1 would be one Long Pulse, followed by one Short Pulse
- Manual Unit ID Change: 2 Long Pulses (approximately 1 second each)
- Unit ID Change via Programmer: 5 Short Pulses (0.5 second each)
Battery & Power:
- Powered by two coin cell CR2032 (3.0V) Lithium batteries
- Always in deep sleep mode - only uses power when a button is pressed
User Identification:
- Select a channel in less than 5 seconds, indicating session choice
- Select a channel anytime - even when a session is underway
- Channel selection is stored in nonvolatile memory
- Channel selection is preserved until changed by participant
RF Technology:
- Available Channels: Up to 82 sessions can be running at one time in close proximity without interference.
- Will not interfere with other technologies.
Range: 200 foot range (400 ft. coverage)

RF - RF

Accessibility Clicker

Model: Accessibility

Suggested Products