Pro AV Catalog
AtlasIED - AA200PHD
Request
Quote
All Products
from this brand

6-channel 200W Mixer Amplifier with Automatic System Test

Series: Atlas

Model: AA200PHD

  • 200W into 25V/70.7V and 4 Ohm load
  • Contact closure mute terminals
  • Variable mute sensitivity control for input 1
  • Preamp in for external processors
  • Line output
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The AA200PHD is a six input channel mixer amplifier designed for distributed business paging and background music (BGM) systems, medium to large speech privacy systems, and in applications where music on hold (MOH) plus paging is required.

With one microphone/line input and two stereo line inputs, the AA200PHD will accommodate a variety of input sources including paging microphones, media players, and digital music receivers. The AA200PHD includes a patent pending automatic system test, the Push Here Diagnostic (PHD). The PHD button is designed to check the connected speaker lines for wiring and impedance errors. This test can be activated once all speakers are connected and the circuit automatically verifies that the attached speakers' tap settings do not exceed the amplifier's rated power, no speakers are mistakenly tapped at 8ohm, and the speaker wire is free from shorts. The unit also incorporates a Remote Input Selection and Remote Level Control feature that allows the integrator to use a remote wall plate (Atlas Sound model WPD-RISRL) and allow the user to select the input and adjust the volume from that wall plate up to 200 feet from the amplifier.

The AA200PHD provides 200-watts output power into 25V, 70.7V, or 4ohm speaker systems. Rear panel DIP switch allows for creation of Zone 2 output mix using any or all of inputs 1-4. Unit can also be set-up to mute Inputs 2 through 6 on signal from Input 1 for paging applications where other input sources need to be muted during a page. Inputs 1-4 are either Mic or Line input selectable and Phantom Power is an option when using them as a microphone input.
  • 200W into 25V/70.7V and 4 Ohm load
  • Contact closure mute terminals
  • Variable mute sensitivity control for input 1
  • Preamp in for external processors
  • Line output
  • Remote Input Select (RIS)
  • Remote level control
  • Input assignable zone 2 output
  • Three unbalanced, summing line level inputs
  • Four Balanced Mic/Line/Tel Inputs with/ Phantom Power
  • Automated diagnostic system test (Push Here Diagnostic)
 
Request Quote
 

Suggested Products