Pro AV Catalog
Whirlwind Music Distributors, Inc. - MIP7
Request Quote
All Products

1-gang Microphone/Line Source Wallplate

Model: MIP7

  • Color coded RCA input jacks
  • 3.5mm input jack
  • 1/4" TS input jacks
  • Ground Lift switch to help eliminate hum and buzz
  • Stereo/Mono switch for stereo operation or safely combine both inputs into a mono signal sent to both outputs
Compare
Project List
Product Info
Tech Specs
The MIP7 permits the connection of a microphone or line source to a single mic input of a remote audio processor. The mic input XLR is connected directly to the output screw terminal plug. Set the audio processor channel gain for the desired system level of the MIP7 mic output. A stereo line source can be connected to the 3.5mm TRS jack. Left and right are automatically summed to mono and applied to the line input volume control. This pot allows adjustment of the line input to avoid overdriving the mic preamp in the remote processor. Condenser mics can receive phantom power from the processor. Use only one input of the MIP7 at a time. Do not use the mic and line inputs simultaneously.

This unit contains two separate DIs - input your signals with one 3.5mm (1/8") mini TRS stereo jack, color coded RCA phono jacks or 1/4" TS input jacks. The RCA and 3.5 mm jacks are wired in parallel if a through connection is required. Outputs are on the rear via 3.5 mm screw type removable plugs (Phoenix 1984329 or equivalent).

  • Color coded RCA input jacks
  • 3.5mm input jack
  • 1/4" TS input jacks
  • Ground Lift switch to help eliminate hum and buzz
  • Stereo/Mono switch for stereo operation or safely combine both inputs into a mono signal sent to both outputs
  • 20dB pad switch for connection to "hot" input signals
  • Uses Whirlwind's TRHL-M transformers with metal shield
 
Request Quote
 

Suggested Products