The RU-BNF modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.
APPLICATION: The RU-BNF is an RDL Format-A sender/receiver that connects to a Dante-enabled network, providing all the features of an RDL RU-FN Format A to Network Interface and an RU-NFD Network to Format-A Interface/Distributor.
Network to Format-A Interface/Distributor Section
The RU-BNF converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.
One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.
The Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.
The RU-BNF output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.
Converts RDL Format-A and aux source to four dante network channels
Easy installation with format-A connections on RJ45 through CATx Cable
Format-A audio sources from pairs A, B and C converted to dante
Fourth dante audio channel fed from unbalanced or balanced aux line input
Front-panel gain adjustment with dual-LED VU meter for aux input
Signal LEDs indicate audio for each of the three audio source format-A pairs
Converts four dante network audio signals to RDL Format-A and Aux
Three Dante audio signals feed format-A output pairs A, B and C
Fourth Dante audio signal feeds auxiliary balanced +4 dBu line output
Format-A pairs are distributed to three separate format-A output jacks
Signal LEDs indicate audio for each of the four received dante audio signals
External 24 Vdc supply powers all connected format-a modules through RJ45 Jacks